Lead Wires, Patient Cables, Wire Separators:
Available in a variety of colors and configurations for use with biopotential skin electrodes and monitoring equipment.




PATIENT CABLES / 3 AND 5 LEADS

 Price List

Designed for compatibility with standard molded DIN 1.5 mm safety socket terminations (unshielded). They are constructed of a rugged gray PVC insulated cable with an AAMI 6-pin connector that has 1 KOhm series resistors molded into the termination for "built in" circuit protection. They are also available unterminated to accommodate the termination of your choice.

The three-lead model (XS-553 & 553U) is color coded for green, white, and black lead wires.
The five-lead model (XS-555 & 555U) is color coded for green, white, black, brown, & red lead wires.
Total length: 10 feet / 3 meters

XS-553-- Three-lead cable, terminated
XS-553U-- Three-lead cable, unterminated
XS-555-- Five-lead cable, terminated
XS-555U-- Five-lead cable, unterminated		 Order Form


MATING CONNECTOR END / PANEL MOUNT
for use with XS-553 & XS-555 cables

 Price List

These connectors are needed only for custom installations of monitors and instrumentation to allow mating with the XS-553 & XS-555 patient cables. The XS-556 is made of black plastic with solderable contacts and four holes for panel mounting.

XS-556-- Mating Connector Panel Mount
XS-556A-- Male Connector Cable End		 Order Form
Sorry No Picture
Available Yet

UNITIZED 3-LEAD SHIELDED PATIENT CABLES

 Price List

These patient cables combine three color-coded lead wires with standard snap connector terminations molded to a patient cable, producing a completely shielded unit that substantially reduces EMI and motion artifact. They are gray PVC insulated cables, unterminated at the equipment end. The standard snap connectors are color coded black, green, and white. A bed sheet clip attaches to the yoke and anchors the unit in place while in use. . Lead wire length: 3 feet (.9 meters). Overall length: 13 feet (3.9 meters)

XS-560-- Unitized 3-lead cable, Shielded 		Order Form

COMPACT PINCH LEAD WIRES

 Price List

These are designed for Holter and Neonatal applications and for use with standard snap connector electrodes. They are constructed of a rugged gray thermoplastic insulated wire with a molded DIN 1.5mm safety socket termination of the unshielded version. Available in an assortment of standard colors and lengths. A shielded, unterminated version is available as well.

Refer to chart below when ordering		 Order Form

SNAP CONNECTOR LEAD WIRES

 Price List

These are designed for compatibility with standard snap connector electrodes. They are constructed of a rugged gray thermoplastic insulated wire with a molded DIN 1.5mm safety socket termination on the unshielded version. Available in an assortment of standard colors and lengths. A shielded, unterminated version is available as well. 

Refer to the chart below when ordering		 Order Form

PINCH AND SNAP ORDER ID CHART


40 inch
Snap
Pinch
*Shielded
White
XS-40-W
S
P
SH
Green
XS-40-G
S
P
SH
Brown
XS-40-Br
S
P
SH
Black
XS-40-Bl
S
P
SH
Red
XS-40-R
S
P
SH

e.g. XS-40-W-P = 40 inch White Pinch Unshielded
e.g. XS-40-BR-P-SH = 40inch Brown Snap Shielded

*The above lead wires are shipped as unshileded unless specified (SH)
**Shielded lead wires are shipped unterminated to allow the connections of your choice.

SPECIAL CABLE STYLES, TERMINATIONS, PLUG STYLES, AND CUSTOM CABLES

If you have a special cable situation that requires custom configurations, terminations, or plug styles, we may be able to help you. Give us a call, email, or fax us with your needs. We will get back to you as quickly as possible with our proposals.

 Price List          Order Form