B-200 SERIES: Thin-line biopotential skin electrodes (Please scroll down for Product Codes and Specifications)    
Indicated for Use: They are designed for applications requiring a very thin, light weight electrode.    
Features: Compact, cost effective, highly versatile, waterproof, reusable, resurfacable and extremely durable.    
Description: A 1mm thick, solid DocXS Ag-AgCl electrode, with an overall electrode element thickness of approximately 3mm. Thin-Line electrodes are compact, cost effective, versatile and extremely durable. No housing is employed; instead the disk is sealed with a coating of epoxy on the back only leaving the rim and underside exposed for contact with the subject. The electrode may be applied to the skin with or without an electroconductive gel; however we do recommend the use of our adhesive gels, adhesive washers, or tape wraps to insure maximum signal strength and quality.
Tac Gel, (XS-521),
Adhesive Electrode Washers (DW-412)
Micropore Tapes and Coban Wraps (XS-540 thru XS-543).
Please refer to our accessories catalog or web site for more details.		  



Thin Line Electrodes
Lead wires: Light Duty Tinseled multi-strand copper, 1mm diameter, PVC insulated, unshielded 40 inches long, strong, flexible and fatigue resistant.    
Terminations: 1.5DIN Safety socket is standard (U) Unterminated, allows for the termination of your choice.    
     
     
B-200 SERIES: Thin-Line Implantable Electrode Sensor Disks (Please scroll down for Product Codes and Specifications)    
Indicated for Use: Designed for surface biopotential recording, electrophysiology, and subcutaneous implantation for animal research.    
Features: Water proof, thin profile, Silicone lead wire and strain relief, reusable, cold sterilizable resurfacable and extremely durable.  



Thin line implantable
electrodes

Description: Versatile solid DocXS Ag-AgCl electrodes have a thin, 3mm profile, and waterproof surface. They are coated and sealed with a thin layer of hard epoxy plastic on the back side, leaving only the 1mm thick rim and underside exposed as a contact surface.

  
Lead wires: A highly flexible white Silicone insulated Copper wire, 20 cm in length, is permanently attached to the electrode and sealed with epoxy. A Silicone rubber strain relief is added at the point of attachment to the sensor for water resistance and durability.  
Available sizes: approximately 3mm thick by 4 mm, 8 mm, or 12 mm in diameter    
     
     
ORDERING INFORMATION: Product codes and descriptions
             
B - 200 SERIES: Thin - Line Biopotential Skin Electrodes Order Form
             
Product
Code
Sensor
Diameter
Housing
Diameter
Sensor
Height
Wire
Type
Termination
Style
Attachment
Type
             
B231-L 4mm N/A 3mm Profile Light Duty Safety Socket Tac Gel, Tapes
B232-L 8mm N/A 3mm Profile Light Duty Safety Socket Tac Gel, Tapes
B232-H 8mm N/A 3mm Profile Heavy Duty Safety Socket Tac Gel, Tapes
B233-L 12mm N/A 3mm Profile Light Duty Safety Socket Tac Gel, Tapes
B233-H 12mm N/A 3mm Profile Heavy Duty Safety Socket Tac Gel, Tapes
             
         
Terminology Legend
N - Narrow rim housing
W - Wide rim housing
P - Low profile
E - EZ grip style housing
L - Light duty, 1mm diameter,
tinseled wire
H - Heavy duty, 1.7mm diameter,
tinseled wire
U - Unterminated lead wire
Sil - Silicone lead insulated wire,
light duty copper, no tinsel
Snap - Snap connector termination
PN - 0.08 Diameter Nickel Plated
Pin termination
NOTE - All lead wires are terminated with safety sockets unless otherwise specifiied.
COLORS - Black, Red, Green, Grey White
B - 200 SERIES: Thin - Line Implantable Electrode Sensor Disks Order Form
         
Product
Code
Electrode
Diameter
Electrode
Height
Wire Length
and Type
 Termination
         
B231-Sil 4mm 3mm Profile 20cm Light Duty Silicone Unterminated
B232-Sil 8mm 3mm Profile 20cm Light Duty Silicone Unterminated
B233-Sil 12mm 3mm Profile 20cm Light Duty Silicone Unterminated